欧兰公司主站
北京欧兰科技发展有限公司

 




no-img
喷雾干燥器的在线颗粒监测
 

颗粒和液滴成像

In-situ monitoring of particles improves product quality and can help to optimize the efficiency of particle based processes.

LaVision’s ParticleMaster inspex systems visualize and analyze particle size, shape and velocity applying high magnification shadow imaging. Particles can be solid particles, droplets or gas bubbles with physical dimensions ranging from 5µm to several millimeters in size. Good statistical sampling for robust quality control measurements is achieved recording a large number of particles at high data rates. In addition to other particle analysers, the imaging approach also reveals absolute particle number density, volume fraction and mass flux.

 
 
no-img
 采用发射头-接收头配置的ParticleMaster inspex系统
 

ParticleMaster inspex measured quantities:

  • size and shape: diameter, perimeter, circularity …
  • velocity and mass flux
  • cumulated statistics D10, D32, percentiles Dv10, Dv50, Dv90
  • size histograms, scatterplots

These compact and highly integrated imaging systems are especially designed for quality control applications in industrial environments. The instruments are factory calibrated, splash-proof and eye-safe with a well-defined mechanical interface for test bench integration.

 

 
 
no-img
探头构型的ParticleMaster inspex 
 
 
 
no-img
 
 

The ParticleMaster inspex systems are available in a variety of setup configurations, each optimized for a your application scenario. For manual sample testing a benchtop system offers the highest flexibility for laboratory use. The on-line probe configuration offers a higher process integration for continuous particle monitoring in e.g. a bypass flow cell. Finally, the compact in-line probe can be completely installed inside the particle flow for in-situ measurements of a particle generating process.

In dilute and medium dense particle dispersions these probes work without any further sample preparation. Additional sample preparation and dilution extend the operational range to even higher density particle flows.

The ParticleMaster inspex software package automatically identifies valid particles in the recorded images and calculates all relevant particle properties with outstanding processing speed including statistical information in real-time.

As the ParticleMaster inspex systems are based on imaging, the visual feedback of highly resolved particle images gives you the necessary confidence in the quality of the measurement.

 
 
系统特色
  • in-situ particle imaging: size,shape, velocity with statistics
  • no sample preparation required for transparent probe volumes
  • compact self-contained probes and lights
  • fully factory calibrated for particle size and probe volume dimensions
  • automated particle image recording and analysis
 
 
相关应用
  • spray testing: water, fuel, paint, household
  • on-line control of powder, solid particles: alloys, ceramics, grains
  • inspection of bubbles: heat exchanger, industrial processes
  • particle monitoring in spray dryers
 

产品信息

 

相关产品

工业颗粒检测

 
 
基于博卡先锋SiteEngine构建
北京欧兰科技发展有限公司 版权所有 电子邮件:info@oplanchina.com oplan@263.net,
联系电话:010-62623871, 62616041,62612809 传真:010-59713638
地址:北京市,海淀区,上地十街1号,辉煌国际中心1号楼1006室 邮政编码:100085京ICP备07038319号-1
Processed in 0.045 second(s), 3 queries